The project started on 12/11/2012 with the delivery of the wings. All steps were followed per plans except for not installing the leading edge stall warn system (using Garmin angle of attack instead). Also changed the routing of the internal wires to avoid the Garmin GMU 22 area. Used the standard Vans wing wiring harness kit. Instead of grounding some "Ground Wires" to the wing frame itself, I ran most wires all the way back to the main ground block. The installation of the wings was very easy. The first one(left) I did myself because no one was available to help. The second one I did after an operation, so I needed a little help from friends. This wing also went on easily after a little coaxing.